Alphacool Eisbecher Aurora 150mm Glass Reservoir with D5 Body (Pump Not Included), Black/Acetal

"The Alphacool Eisbecher Aurora glass reservoir uses a real glass tube rather than the standard acrylic tube. There are two basic mounting options, but these can be used in a versatile way. The glass reservoir has feet included so that it can be mounted to the bottom of the case. However, Alphacool also includes mounting frames which the Eisbecher Aurora can also be mounted on any 120 or 140 mm fan location. This also means you can mount directly on to radiator or fans.

12 aRGB LEDs illuminate the glass tube of the reservoir. They are located in a ring at the bottom of the glass tube and are not visible from the outside. The illumination is particularly strong at the bottom and slowly decreases towards the top. The Digital RGB LEDs are connected via a 3-pin JST connector. Other Alphacool Digital RGB products can be connected directly via the Y-adapter.

A special water effect is created in the Aurora Eisbecher via the riser tubes. If you do not fill the reservoir beyond the top of the riser tube, you will get a fountain effect. In this case, the water is pushed out the sides of the riser tube and splashed against the glass tube. Depending on the strength of the flow of the loop, the effect is stronger or weaker. There is one riser tube with this effect at the bottom inlet and one at the top inlet.

This Eisbecher Aurora reservoir is compatible with all original D5 Xylem/Lowara pumps and all Alphacool VPP pumps.

Technical data:

L x W x H: 77 x 77 x 242 mm
Height incl. stand mounting bracket: 269 mm / 288 mm
Illumination: 5V D-RGB LED‘s
Number of LEDs: 12
Material housing: Acetal
Material tube: Glass
Material framing bar: Aluminium
Connection: 1x G1/4“ IN / 4x G1/4“ OUT
Cable length: 40 cm
Connector digital aRGB: 3-Pin JST + 3-Pin 5V
Maximum working temperature: 60 °C"