Alphacool Eisbaer Pro ES (Solo) Full CPU Water Block and Pump and Thermal Grizzly Intel 13th/14th Gen CPU Contact Frame Bundle

This bundle includes the Alphacool Eisbaer Pro ES (Solo) and Thermal Grizzly INTEL LGA 1700 contact frame.

The Alphacool Eisbaer Pro ES (Solo) offers a significantly higher cooling surface than the normal Eisbaer. It was specially developed for extremely large CPU DIEs and completely covers processors such as the AMD Threadripper but also the AMD Ryzen CPUs. The Eisbaer Pro has also been designed for the Intel Socket 3647 in order to ensure the best possible cooling performance for the entire CPU. The Eisbaer Pro is a real all-rounder. Expandable, fully compatible with DIY water cooling components and it is the optimal solution for the most powerful processors on the market.

cooler
The cooler base covers the entire surface of the respective processors. The area of the cooling fins is around 55 x 42mm and surpasses all known processor cores. This ensures that all hotspots of a CPU are flooded with water and optimally cooled. With the included AM4 mount, cooling an AMD Ryzen processor is also child's play. The cooling fins are 0.4mm thick and are also at an optimal distance of 0.4mm from each other. There are a total of 58 cooling fins on the cooler floor. The base of the cooler is only 3mm thick, which means that the heat can reach the water and dissipate it as quickly as possible.

pump
The Eisbaer Pro ES (Solo) cooler uses the very compact and small DC-LT 2 pump. It offers enough power to integrate other components such as GPU water coolers or radiators into the water cycle.

Usable connections
Connections that are too large mean that the fill port can no longer be used. For this we give the following recommendation:
- up to and including 13/10 without restriction
- 16/10 only in angled version
- connections larger than 16/10 should not be used

Compatibility:
Intel: 1700 / 2011 / 2011-3 / 2066 / 3647 Narrow & Square / LGA 4189
AMD: TR4 / sTRX4 / SP3 / sWRX8 / AM4 / AM5

The Intel 13th and 14th Gen CPU Contact Frame is a mounting aid that replaces the motherboard's original Integrated Loading Mechanism (ILM) to enable better cooling performance of CPU coolers through optimized contact pressure.

Due to the changed dimensions of the Intel Raptor Lake (Intel Core 13th and 14th Gen) for the Intel Socket LGA1700 compared to the Socket 1200 processors (and older generations, such as Socket LGA115X) as well as the associated changes to the dimensions of the socket, New mounting brackets for CPU coolers have become necessary.

Additionally, the standard ILM only has contact points in the middle of the elongated CPU. Due to the resulting uneven contact pressure of the processor into the socket, the surface of the Integrated Heatspreader (IHS) bulges concavely, which means that the base plate of the CPU cooler rests primarily on the edges of the IHS and thus the thermal "hotspot" in the middle of the CPU is not covered.