Alphacool Apex Distro Plate Y60 with D5 Apex Pump

The Alphacool Apex Distro Plate is the optical upgrade for the Y60. It was designed specifically for this case and replaces the front glass panel. A must-have for every custom water cooling system.

Apex Design
Alphacool's Apex product line represents the highest level of perfection. First-class materials and innovative technologies guarantee a unique premium product. A core element are the chrome-plated G1/4" connections made of brass. This means that Alphacool avoids the problem of possible leaks due to cracking by screwing the connections directly into the acrylic. The connections are in two parts, have an O-ring and lock against each other of mounting in the acrylic.

High-quality choice of materials & brilliant lighting
Alphacool's Apex Distro Plate is made of high-quality acrylic glass. This allows a clear view of the coolant and enables a brilliant play of colors thanks to the built-in digitally addressable aRGB lighting. The lighting can be controlled via a digital aRGB -Header on the mainboard or optionally controlled by Alphacool's Aurora Eiscontrol aRGB controller (item no.: 15360).

Easy installation
The Alphacool Apex Distro Plate Y60 replaces the front glass panel of the Y60 case and is easy to install. It is installed in place of the glass panel and securely fastened using the existing original screws. After assembly, the Distro Plate is connected to the water cooling circuit.

Note: The Apex Distro Plate Y60 is only compatible with the Y60 case.

Attention: Mounting the Distro Plate is not possible if a 140 mm or 280 mm radiator is attached to the side.

Compatibility:
- Y60 case

Technical data
Dimensions (L x W x H): 344.50 x 213.50 x 87.30mm
Material: Acrylic
Volume approx.: 300ml
Pump compatibility: VPP/D5
Connections: 6x G1/4“ + 1x fill port and 1x drain port
Maximum working temperature: 60°C
Pressure tested: 0.8 bar
Number of digital aRGB LEDs: 11
Voltage digital aRGB LEDs:5V

Technical data Pump
Material pump: plastic
Pump cover material: aluminum
Axle material: Ceramics
Connections: 4-Pin PWM | SATA
Control range: 2500 - 4500 RPM
Cable lengths: 4-Pin PWM - 48cm | SATA - 48cm
Operating voltage: 8-13V DC / 14W IP32
Starting voltage: 12VDC
Maximum flow: 340L/h