Thermal Grizzly Lapping Tool Ryzen 7000 and KryoSheet Thermal Pad, 33 x 33mm Bundle

This kit includes the Thermal Grizzly AM5 Lapping Tool and KryoSheet thermal pad.

The AM5 Lapping Tool is designed to grind the heat spreaders of AMD's AM5 processor series. The tolerances of the AM5 lapping tool allow the heatspreader to be ground down step by step by 0.4 millimeters, up to a total height of 1.6 millimeters. When using the standard AMD mounting frame (SAM), a maximum grind of 1.0 mm is allowed until the middle steps are reached. A further 0.6 mm is only possible if the CPU is mounted with a suitable AM5 contact frame, for example (product will follow shortly).

Even with a moderate overclocking of all cores of the Ryzen 9 7950X to 5.4 GHz, the test system remained 4 degrees Celsius below the temperature limit of 95 degrees C.

• Simplifies AM5 CPU grinding
• CNC-milled acrylic glass
• Complete set with sandpaper
• Single use

It should be noted that grinding the CPU will void the warranty. For the largest possible contact area between the IHS and the base plate of the CPU cooler, the latter should also be sanded.

The graphene thermal pads of the Thermal Grizzly KryoSheet series can be used as an excellent alternative for thermal compounds from the higher performance segment. Similar to the Carbonaut pads, they have an adaptable surface with very high thermal conductivity. Compared to Carbonaut pads, KryoSheet offers a significantly higher thermal conductivity as a high-end product.

• Outstanding thermal conductivity
• Simple application
• Consistently high performance
• Extreme longevity

Size:
33x33mm: AMDSocket AM5 CPUs