Thermal Grizzly Lapping Tool Ryzen 7000 and Conductonaut Liquid Metal Thermal Paste (1g) Bundle

This kit includes the Thermal Grizzly AM5 Lapping Tool and Conductonaut liquid metal thermal paste, 1g.

The AM5 Lapping Tool is designed to grind the heat spreaders of AMD's AM5 processor series. The tolerances of the AM5 lapping tool allow the heatspreader to be ground down step by step by 0.4 millimeters, up to a total height of 1.6 millimeters. When using the standard AMD mounting frame (SAM), a maximum grind of 1.0 mm is allowed until the middle steps are reached. A further 0.6 mm is only possible if the CPU is mounted with a suitable AM5 contact frame, for example (product will follow shortly).

Even with a moderate overclocking of all cores of the Ryzen 9 7950X to 5.4 GHz, the test system remained 4 degrees Celsius below the temperature limit of 95 degrees C.

• Simplifies AM5 CPU grinding
• CNC-milled acrylic glass
• Complete set with sandpaper
• Single use

It should be noted that grinding the CPU will void the warranty. For the largest possible contact area between the IHS and the base plate of the CPU cooler, the latter should also be sanded.

The Conductonaut liquid metal thermal paste was developed for applications with high efficiency. The Conductonaut is recommended as a top product for experienced users who are looking for a solution with the best heat dissipation in the temperature range of over 8 degrees C. The Conductonaut liquid metal thermal paste was developed for applications with high efficiency. 

Ultra high thermal conductivity
Increased proportion of indium
Optimal application thanks to plastic needle

Thermal conductivity 73 W / mk
viscosity 0.0021 Pas
density 6.24g / cm3
temperature 10 degrees C / +140 degrees C
content 1 g