Thermal Grizzly Lapping Tool Ryzen 7000 and Conductonaut Extreme Thermal Paste (g) Bundle

This kit includes the Thermal Grizzly AM5 Lapping Tool and Conductonaut Extreme Thermal Paste, 1g.

The AM5 Lapping Tool is designed to grind the heat spreaders of AMD's AM5 processor series. The tolerances of the AM5 lapping tool allow the heatspreader to be ground down step by step by 0.4 millimeters, up to a total height of 1.6 millimeters. When using the standard AMD mounting frame (SAM), a maximum grind of 1.0 mm is allowed until the middle steps are reached. A further 0.6 mm is only possible if the CPU is mounted with a suitable AM5 contact frame, for example (product will follow shortly).

Even with a moderate overclocking of all cores of the Ryzen 9 7950X to 5.4 GHz, the test system remained 4 degrees Celsius below the temperature limit of 95 degrees C.

Simplifies AM5 CPU grinding
CNC-milled acrylic glass
Complete set with sandpaper
Single use

It should be noted that grinding the CPU will void the warranty. For the largest possible contact area between the IHS and the base plate of the CPU cooler, the latter should also be sanded.

The Conductonaut Extreme liquid metal thermal compound is the further development of Conductonaut and was developed for applications with maximum power density. As a gallium-based liquid metal, Conductonaut Extreme is a metallic alloy that is liquid at room temperature, allowing for the minimum possible layer thickness.

Optimised thermal conductivity compared to conventional liquid metal
Increased material compatibility
Optimum application due to metal needle
Attention: Electrically conductive!
Do not bring into contact with aluminium!

Conductonaut Extreme thermal paste is technically not a thermal paste, as a paste consists of liquid and solid particles. The surfaces of the base plate of the CPU cooler and the CPU heat spreader are uneven on a microscopic level.