Thermal Grizzly Contact Frame and Lapping Tool for Intel's 12th, 13th & 14th Gen processors with Kryonaut Thermal Paste (2g) Bundle

This kit includes the Thermal Grizzly lapping tool, contact frame for Intel's 12th, 13th, & 14th gen processors, and Kryonaut thermal paste (2g).

The lapping tool for Intel's 12th, 13th, and 14th Gen processors allows the heat spreader to be safely lapped. The CPU is simply mounted on the lapping tool using the enclosed screws. The tolerances of the lapping tool allow the heat spreader to be ground down by 0.2 millimetres.

The Intel 13th and 14th Gen CPU Contact Frame is a mounting aid that replaces the motherboard's original Integrated Loading Mechanism (ILM) to enable better cooling performance of CPU coolers through optimized contact pressure.

Warning: Removing the CPU heat spreader and the motherboard socket holder (retention module) is done at your own risk and is always accompanied by the complete loss of the manufacturer's guarantee and warranty!

The Kryonaut thermal paste was specially developed for the extremely demanding applications and the highest demands of the overlocking community. Kryonaut is also recommended as a top product for critical cooling systems in the industrial sector.

Thermal conductivity 12.5 W / mk
Thermal resistance 0.0032 K / W
Electrical conductivity * 0 pS / m
Viscosity 120-170 Pasdensity 3.7g / cm3
Temperature -250 ° C / +350 ° C

Scope of delivery

• 1x lapping tool
• 4x screw
• 4x PU washer
• 1x hexagon socket spanner 2,5mm
• 1x 400 grit sandpaper
• 1x Sandpaper 1.200 grit
• 1x Sandpaper 2.500 gri
• 1x 13th and 14th Gen. CPU Contact Frame
• 1x T20 angle wrench
• 1x Kryonaut thermal paste (2g)