Thermal Grizzly Contact Frame and Lapping Tool for Intel's 12th, 13th & 14th Gen processors with Conductonaut Extreme Thermal Paste (1g) Bundle

This kit includes the Thermal Grizzly lapping tool, contact frame for Intel's 12th, 13th, & 14th gen processors, and Conductonaut Extreme Thermal Paste (1g).

The lapping tool for Intel's 12th, 13th, and 14th Gen processors allows the heat spreader to be safely lapped. The CPU is simply mounted on the lapping tool using the enclosed screws. The tolerances of the lapping tool allow the heat spreader to be ground down by 0.2 millimetres.

The Intel 13th and 14th Gen CPU Contact Frame is a mounting aid that replaces the motherboard's original Integrated Loading Mechanism (ILM) to enable better cooling performance of CPU coolers through optimized contact pressure.

Warning: Removing the CPU heat spreader and the motherboard socket holder (retention module) is done at your own risk and is always accompanied by the complete loss of the manufacturer's guarantee and warranty!

The Conductonaut Extreme liquid metal thermal paste is the further development of Conductonaut and was developed for applications with maximum power density. As a gallium-based liquid metal, Conductonaut Extreme is a metallic alloy that is liquid at room temperature, allowing for the minimum possible layer thickness.

density 6.29g/cm³
temperature 17 °C–150 °C
content  1 g 

Scope of delivery

• 1x lapping tool
• 4x screw
• 4x PU washer
• 1x hexagon socket spanner 2,5mm
• 1x 400 grit sandpaper
• 1x Sandpaper 1.200 grit
• 1x Sandpaper 2.500 gri
• 1x 13th and 14th Gen. CPU Contact Frame
• 1x T20 angle wrench
• 1x Conductonaut Extreme Thermal Paste (1g)