Alphacool Eisbecher Aurora D5 150mm Reservoir with D5 VPP655 PWM PumpAcetal/Glass

The Alphacool Eisbecher Aurora reservoir has an integrated pump top for powerful D5 pumps and comes with a VPP655 PWM pump. The reservoir tube is made of glass, the D5/VPP pump top and lid are made of acetal. The combination of these two materials gives the reservoir an independent and elegant look. The wow effect is provided by 12 digitally addressable RGB LEDs in the top of the pump and the light tower water effect inside the glass tube.

Extensive mounting options
Mounting option 1:
The scope of delivery includes feet which, among other things, enable the expansion tank to be mounted on the bottom of the housing.

Mounting option 2:
The scope of delivery includes 120mm/140mm mounting frames with which the Eisbecher Aurora reservoir can be attached to free fan spaces, radiators or to the fans on radiators.

Digitally addressable RGB lighting
12 digitally addressable RGB LEDs illuminate the glass tube of the reservoir. They are attached in a ring shape to the lower end of the tube in the transition to the top of the pump and ensure brilliant illumination of the entire reservoir. In combination with the Lighttower water effect, a very special ambience is achieved. Especially due to the reflections in the real glass. The digital aRGB LED lighting is connected via a JST 3-pin connector and can be controlled with a digital RGB controller (e.g. Alphacool Aurora Eiscontrol, Art.15360) or a digital RGB capable mainboard.

Lighttower water effect
A special water effect is created in the ice cream cup reservoir via the riser tubes. If you don't fill the reservoir over the upper edge of the riser tube, you get a kind of fountain effect. The water is pushed out the sides of the riser tube and sprayed against the glass tube. Depending on the flow of the circuit, the effect is stronger or weaker.

pump
The VPP655 pump is ideal for water cooling PCs and other electronic components. The DC motor pump is equipped with an electronically commutated spherical motor. In a spherical motor pump, the only moving part is a spherically shaped rotor, which in this case rests on a ball bearing made of ultra-hard and wear-resistant ceramic. The spherical bearing of the rotor offers a number of advantages: An increase in the bearing play is not possible due to the design, the pump will always run consistently quietly and quietly. A separate magnetic shielding is also not necessary with this pump. The spherical motor principle allows efficient operation with excellent performance. All parts of the pump are completely corrosion resistant.

Technical Data:
Dimensions (L x W x H): 142x77x77mm
Pump Compatibility: D5
Volume: 180ml
Material pump top & lid: Acetal
Material Tube: Glass
Connections: 1x G1/4" internal thread IN / 4x G1/4" internal thread OUT
Maximum working temperature: 60c
Pressure tested: 0.8 bars
Number of digital aRGB LEDs: 12
Voltage digital aRGB LEDs: 5V
Power connection digital aRGB LEDs: 3-pin JST (male & female switch)

Specifications VPP655 PWM:
Dimensions (L x W x H): 65x65x57mm
Material pump: Plastic
Material axis: pottery
Power connection: 4 pin Molex
Control range: 800-4800 RPM
Operating voltage: 8-24Vdc
Power consumption: 23W
Maximum head: 3.7m
Maximum flow: 1000l/h
Maximum working temperature: 60c