The Alphacool Eisblock Aurora Acrylic GPX-N with backplate combines style with performance and extensive digital RGB lighting. The experience of over 17 years has been incorporated into this graphics card water cooler and represents the current highlight of Alphacool product development.
In the first step, the cooler was brought closer to the individual components by reducing the thermal pads to a thickness of 1 mm. In the second step, the nickel-plated copper block was also made thinner. Instead of the previous 7 mm, it is only 5.5 mm thick. The water flow inside the cooler has also been optimized. All important components such as the voltage converters and the RAM are now cooled much better and more effectively by the water.
The Eisblock Aurora Acrylic GPX-N cooler has been fundamentally designed in such a way that the lighting is more in the foreground than in the previous models. The addressable digital RGB LEDs are embedded directly into the cooling block and run along the side of the entire cooling block. The effect is lighting that encloses the entire cooling block. No corner or edge remains unlit by the aRGB LEDs. The new design is more angular, with all edges beveled. The result is better light scattering in the water cooler due to the reflections on these slopes. In addition, they create various contours that give the Eisblock Aurora Acrylic GPX-N cooler its very own optical touch.
Of course, Alphacool only uses copper in its water coolers. The copper of the Aurora Acrylic GPX-N Eisblock is nickel-plated. Alphacool has further improved the type of noddling, which has significantly increased acid resistance. A flaking is to be excluded.
The graphics card water cooler Eisblock Aurora Acrylic GPX-N also relies on the new patented locking screws, which close flush with the surface of the terminal. The Alphacool logo now sits in the corner on the top and is also fully illuminated. On the front of the terminal you can see corresponding names of the compatible graphics card types. These are also fully illuminated by the digital LEDs. IN and OUT are now marked by small subtle triangles. They are easily recognizable and fit perfectly into the entire optical line of the graphics card water cooler.
Dimensions: 146 x 269.5 x 25 mm
Material (Cold plate): Nickel-Plated Copper
Material (Top): (POM) Clear
Connections: 4 x G1/4"
Fin Thickness: 0.6mm
Lighting Type: 3-Pin Digital RGB (5v)
Gigabyte Aorus RTX 3080 Ti Xtreme
Gigabyte Aorus RTX 3080 Ti Master