Alphacool Laing 12V DDC-1T Plus Pump and AGB ES Reservoir 1U - DDC Pump Top Bundle

This bundle includes the Alphacool Laing 12V DDC-1T Plus Pump and AGB ES Reservoir 1U - DDC Pump Top Version.

This pump is the first pump worldwide which is used in mass-produced water cooled workstations and is ideal for the watercooling of processors and electronic components. Due to its compact size and its power it can be used for many applications.

This DC pump is an electronically commuted ball motor pump with an estimated lifespan of more than 50.000hrs at 12V. The only moving part on the pump is the spherically shaped Rotor unit which is sitting on an ultra-hard, wear-resistant ceramics bearing ball.

A conventional shaft with bearings and seals is not used or needed. The spherical bearing of the rotor unit on the ceramics bearing ball has many advantages: The development of bearing clearance is technically impossible which results in the impossibility of noise level increase over the lifespan of the pump. The bearing is self-adjusting, making the pump consistently quiet in operation over the full lifespan. The pump is directly lubricated by the coolant (wet-running pump). Therefore no maintenance is required.

The Alphacool ES reservoir for DDC pumps is specially designed for 1U server racks. The reservoir is extremely compact and integrated pump top for the DDC pump allows for extremely high pump performance. The large reservoir is more than sufficient for a liquid cooling loop in a 1U server rack.

Installation of the Pump
The installation of the DDC pump is very easy. The O-ring is put on and then the pump is placed into the pump top and fixed with four screws. Please note that a DDC version with the original Laing pump housing is installed.

The Alphacool ES Reservoir 1U - DDC version is an extremely compact expansion tank especially for 1U server racks with extensive connection and mounting options.