Alphacool G1/4" Temperature Sensor Cube, Acetal

The Alphacool Temperature Sensor Cube, Acetal is a simple cube-shaped water temperature sensor that can be easily integrated into any water cycle. The temperature sensor is very compact and can be integrated into any water circuit thanks to its two G1/4" female threads.

It does not matter whether the system is equipped with hoses or HardTubes. The corresponding connections are simply screwed to the sensor and then mounted at any position in the water circuit. By using acetal, the temperature sensor is extremely light with only 29g. Sensor A classic NTC 10 kOhm sensor is used as the sensor.

The readable temperature range is between -40 and 125°C. The cable is 40 cm long and ends in a typical 2-pin connector. Many motherboards now offer direct connection options for such sensors. Please check the manual of your motherboard. Of course, there are also various external controllers that offer a connection for the sensor. Design The new square design stands out from the usual, usually round, sensors.

Alphacool dispenses with large logo placements. The product should be in the foreground. The angular design fits perfectly to the new Alphacool IceBlock graphics cards water cooler series.

Technical data:

Dimensions (L x W x H): 26.5 x 26.5 x 26.5mm
Sensor: NTC 10 kOhm
Measuring range: -40 to 125°C
Connection: 2-pin
Cable length: 40 cm
Thread: 2x G1/4"