XSPC 10mm/14mm PETG Tubing (500mm x4) and Cutting / Bending Toolkit Bundle

This bundle includes 4x XSPC PETG 14mm OD rigid tubes (50cm each), the XSPC Easy Cut & Bend Toolkit, and the XSPC RTL Rigid Tubing Bending Lubricant, 30mL.

XSPC PETG tubing is highly transparent and the extra thick 2mm wall thickness makes the tubing easier to bend without deforming. Each pack contains four 50cm lengths. For use with XSPC fittings only.

XSPC PETG Tool Kit to bend and cut PETG tubing. Includes Heavy Duty Hose Cutter, PETG Easy Bending Tool, Bending Rubber, PETG Chamfer Tool, and PETG Edging Sandpaper. For use with XSPC branded PETG tubing. May not be compatible with other branded PETG products.

XSPC RTL is a water based lubricant for bending PETG or acrylic tubing.

RTL stops the bending rubber (bend cord, silicon insert) from getting stuck inside the tube after making a tight bend. This allows you can make more complex and tighter bends without the risk of snapping the insert and ruining the bend. After completing the bend, simply rinse the tube with warm water to remove the lubricant.

• Water Based Lubricant
• Non-toxic
• Easy Clean
• Non-staining
• Tested with PETG and Acrylic Tubing

One 30ml bottle is enough for 1-2 builds and each 100ml bottle is enough for 3-6 builds.

How to use:

1. Apply a small amount of RTL to the inside of the tube
2. Insert the bending rubber and twist it to coat the rubber
3. Heat the tube and make the required bend
4. Pull the bending rubber out of the tube
5. Rinse the tube throughly with warm water to remove lubricant