The wishlist name can't be left blank

Watercool HEATKILLER Tube Reservoir 200mm and D5 Vario Pump Bundle

Product Highlights
  • This bundle includes the?HEATKILLER Tube 200 and D5 Vario pump
  • The HEATKILLER Tube Series is a modular series of high end reservoirs
  • Made with Borosilicate glass, which is scratch resistant and has very high chemical and thermic resistance
  • The WCP D5-VARIO is a DC pump using the spherical motor design
  • Max. flow rate: 1500 l/h
Sale Price $195.00 Regular Price $198.98
Out of stock
Overview

This bundle includes the HEATKILLER Tube Reservoir and D5 Vario pump.

The HEATKILLER Tube Series is a modular series of high end reservoirs with a glass tube made from borosilicate glass. It has some outstanding features which are listed here.

Large filling mouth

Thanks to a large filling mouth and a bayonet catch lid the HEATKILLER Tube Series reservoirs can be opened without any tools and is easy to fill. It has never been easier to re-fill a cooling medium.

Borosilicate glass tube

Borosilicate is a glass with very high chemical and thermic resistance. It is scratch-resistant and has very low heat expansion. These outstanding features make borosilicate an ideal material for reservoirs.

Large volume

In designing the HEATKILLER Tube Series, we took great care not to waste any of the available volume. That makes the HEATKILLER Tube Series reservoirs very low maintenance, because they need fewer re-fills.

Anti- Cyclone-effect

The exclusively developed anti-cyclone-inlay which is located at the bottom of the reservoir prevents vortices that easily form in reservoirs. This reduces noise levels and makes air bleeding easier.

Streaming-optimized pump chambers

The pump adapter for D5 and DDC pumps comes with a streaming optimized pump chamber. This causes fewer vortices during use, which has a positive effect on both flow rate and air bleeding.

Made in Germany

The HEATKILLER Tube Series reservoirs are completely produced in Germany.

Extensive optional accessories

The HEATKILLER Tube Series reservoirs have various optional features, for example:

Variable Mounting systems

For optimal integration into a water cooled system we offer different mounting systems to fit your build.

…horizontal mount (pedestal)

Two different height pedestals are available for mounting the HEATKILLER Tube Series reservoir to the case floor or free-standing.

… vertical mount

A multifunctional bracket mount offers options for vertical montage. Several adapters are available. Some can be used to attach the reservoir to 120x120mm or 140x140mm cooler slots. Others allow for a montage of the reservoir on a radiator from the MO-RA3 series.

Illumination

HEATKILLER Tube Series reservoirs can be set in scene with LED illumination. We offer splash-safe LED strips in various colors. The strips are hidden in the struts of the reservoir cage.

Reservoir Technical data
Material cover: POM
Material struts: black anodized aluminium
Tube: borosilicate glass
Material bottom: POM
Material Inlay: stainless steel
Measurements (L x W x H): 70 x 70 x 303,5 mm
Tube length: 200mm
Tube diameter: 65mm
Capacity: aprox. 500ml
Weight: aprox. 960g
Seal: NBR, VMQ
Connection thread: 2x G ¼ inch (DIN ISO 228-1)

The WCP D5 is a DC pump using the spherical motor design as developed by Laing. The only moving part in a spherical motor pump is a spherically shaped rotor/impeller unit, which is seated on an ultra-hard, wear-resistant ceramic ball.

The conventional shaft, shaft bearings, and shaft seals have been eliminated. The occurrence of bearing clearance – and the associated increase of noise – is not possible due to the principle involved. Consequently, the pump continues to work quietly throughout its entire service life.

The bearing is self-adjusting. It is lubricated directly by the medium being pumped (wet rotor design). Separate maintenance is not required. All parts in contact with the medium are corrosion resistant.

Under normal conditions, it is impossible for the rotor to become locked due to the spherical motor design. Reliable starting is also ensured even after long periods of shutdown. The permanent magnetic mechanism allows high efficiency output.

The pump's rotation speed can be finely adjusted throughout a wide output range via a speed governor, which is integrated into the stator. Thus, you may easily regulate hydraulic performance or limit power consumption. The pump always uses the same torque, independent from rotational speed, ensuring reliable starting also on the lowest power level.

The pump comes without attachment parts. Operation requires an appropriate pump cover, which is separately available.

Power supply is provided by a 4 pin Molex connector. The pump also offers a 3 pin Molex plug for rotational speed monitoring.

This version comes with a shiny palte made from stainless steel on its back.

Pump Specifications
Dimensions (LxWxH): 65 x 65 x 57mm
Motor design: Electronically commutated spherical motor
Materials: Stainless steel 1.4571, PPS-GF40, EPDM O-Rings, aluminium oxide, hard carbon
Rated voltage: 12V DC
Power consumption: 23 W
Voltage range: 8-24V DC
Pressure head at 12 V: 3,7 m
Max. flow rate: 350 l/h
Acceptable media: Water, water-glycol mixtures
Max. system temperature: 60°C
Max. system pressure: 1,5 bar
Power supply: 4Pin Molex
Rotational speed monitoring: yes (via 3Pin Molex)
PWM: no

Scope of delivery:
1x HEATKILLER Tube 200 D5
1x manual
1x D5 Pump

Details
More Information
Titan Rig SKU03-55-WC-0131-01-CN
Shop BundlesYes
ModelTR-60256-60235
Free Ground Shipping Eligible On Orders Over $99 With Code: FREESHIPPINGYes
Promo Express Shipping EligibleYes
BrandWatercool
LightingNone
PWMNo
Number of Pumps Supported1
Number of G 1/4" Ports2
Pump TypeD5
Product SeriesHEATKILLER
Enterprise ReadyNo

Shall we send you a message when we have discounts available?

Remind me later

Thank you! Please check your email inbox to confirm.

Oops! Notifications are disabled.