Express Shipping Starting At $9.95 - See Details
We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
This bundle includes the HEATKILLER Tube Reservoir and D5 PWM pump.
The HEATKILLER Tube Series is a modular series of high end reservoirs with a glass tube made from borosilicate glass. It has some outstanding features which are listed here.
Large filling mouth
Thanks to a large filling mouth and a bayonet catch lid the HEATKILLER Tube Series reservoirs can be opened without any tools and is easy to fill. It has never been easier to re-fill a cooling medium.
Borosilicate glass tube
Borosilicate is a glass with very high chemical and thermic resistance. It is scratch-resistant and has very low heat expansion. These outstanding features make borosilicate an ideal material for reservoirs.
Large volume
In designing the HEATKILLER Tube Series, we took great care not to waste any of the available volume. That makes the HEATKILLER Tube Series reservoirs very low maintenance, because they need fewer re-fills.
Anti- Cyclone-effect
The exclusively developed anti-cyclone-inlay which is located at the bottom of the reservoir prevents vortices that easily form in reservoirs. This reduces noise levels and makes air bleeding easier.
Streaming-optimized pump chambers
The pump adapter for D5 and DDC pumps comes with a streaming optimized pump chamber. This causes fewer vortices during use, which has a positive effect on both flow rate and air bleeding.
Made in Germany
The HEATKILLER Tube Series reservoirs are completely produced in Germany.
Extensive optional accessories
The HEATKILLER Tube Series reservoirs have various optional features, for example:
Variable Mounting systems
For optimal integration into a water cooled system we offer different mounting systems to fit your build.
…horizontal mount (pedestal)
Two different height pedestals are available for mounting the HEATKILLER Tube Series reservoir to the case floor or free-standing.
… vertical mount
A multifunctional bracket mount offers options for vertical montage. Several adapters are available. Some can be used to attach the reservoir to 120x120mm or 140x140mm cooler slots. Others allow for a montage of the reservoir on a radiator from the MO-RA3 series.
Illumination
HEATKILLER Tube Series reservoirs can be set in scene with LED illumination. We offer splash-safe LED strips in various colors. The strips are hidden in the struts of the reservoir cage.
Reservoir Technical data
Material cover: POM
Material struts: black anodized aluminium
Tube: borosilicate glass
Material bottom: POM
Material Inlay: stainless steel
Measurements (L x W x H): 70 x 70 x 303,5 mm
Tube length: 200mm
Tube diameter: 65mm
Capacity: aprox. 500ml
Weight: aprox. 960g
Seal: NBR, VMQ
Connection thread: 2x G ¼ inch (DIN ISO 228-1)
The WCP D5-PWM is a DC pump using the spherical motor design as developed by Laing. The only moving part in a spherical motor pump is a spherically shaped rotor/impeller unit, which is seated on an ultra-hard, wear-resistant ceramic ball.
The conventional shaft, shaft bearings, and shaft seals have been eliminated. The occurrence of bearing clearance – and the associated increase of noise – is not possible due to the principle involved. Consequently, the pump continues to work quietly throughout its entire service life.
The bearing is self-adjusting. It is lubricated directly by the medium being pumped (wet rotor design). Separate maintenance is not required. All parts in contact with the medium are corrosion resistant.
Under normal conditions, it is impossible for the rotor to become locked due to the spherical motor design. Reliable starting is also ensured even after long periods of shutdown. The permanent magnetic mechanism allows high efficiency output.
The pump's rotation speed can be finely adjusted throughout a wide output range via a speed governor, which is integrated into the stator. Thus, you may easily regulate hydraulic performance or limit power consumption. The pump always uses the same torque, independent from rotational speed, ensuring reliable starting also on the lowest power level.
The pump comes without attachment parts. Operation requires an appropriate pump cover, which is separately available.
Power supply is provided by a 4 pin Molex connector. The pump also offers a 3 pin Molex plug for rotational speed monitoring.
Rotational speed regulation via PWM. This version comes with a shiny palte made from stainless steel on its back.
Pump Specifications
Dimensions (L x W x H): 65 x 65 x 57 mm
Motor design: Electronically commutated spherical motor
Materials: Stainless steel 1.4571, PPS-GF40, EPDM O-Rings, aluminium oxide, hard carbon
Rated voltage: 12V DC
Power consumption: 23 W
Voltage range: 8-24V DC
Pressure head at 12 V: 3,7 m
Max. flow rate: 1500 l/h
Acceptable media: Water, water-glycol mixtures
Max. system temperature: 60°C
Max. system pressure: 1,5 bar
Power supply: 4Pin Molex
Rotational speed monitoring: yes (via 3Pin Molex)
PWM: yes
Scope of delivery:
1x HEATKILLER® Tube 200 D5
1x manual
1x D5 Pump
Titan Rig SKU | 03-55-WC-0132-01-CN |
---|---|
Shop Bundles | Yes |
Model | TR-60256-60234 |
Free Ground Shipping Eligible On Orders Over $99 With Code: FREESHIPPING | Yes |
Promo Express Shipping Eligible | Yes |
Brand | Watercool |
Lighting | None |
PWM | Yes |
Number of Pumps Supported | 1 |
Number of G 1/4" Ports | 2 |
Pump Type | D5 |
Product Series | HEATKILLER |
Enterprise Ready | No |