Valkyrie V-Lite ARGB All In One CPU Cooler (240mm) and Thermal Grizzly 1700 Contact Frame Bundle, Black

This bundle includes the Valkyrie V-Lite All-In-One CPU cooler and the Thermal Grizzly CPU Contact Frame. 

The V-Lite is the 2nd generation of Valkyrie's popular performance-oriented all-in-one CPU liquid cooling system designed for powerful yet silent operation in any PC. It ensures maintenance-free use and is available in both white and black, with options for 240mm or 360mm sizes.


Cold Plate:
Cold Plate Material: Copper
Cold Plate Dimensions: 58.64 x 56.28 x 3.3 mm

Socket Compatibility: 
Intel: 1150 - 1151 / 1155 / 1156 / 1200 / 1366 / 1700 / 1851 / 2011 / 2011-3 / 2066
AMD: AM4 / AM5

Pump Block:
Block Pump Dimensions: 86 x 74 x 68.5 mm
Pump Speed: 800 - 2800RPM
Pump Voltage: 12V
Pump Collector: 4-pin (PWM) + 3-pin ARGB

Radiator:
Radiator Material: Aluminum
Radiator Dimensions: 276 x 120 x 27mm
Radiator Size: 240

Tubing:
Tube Length: 425mm
Tube Material: CIRR + EPDM
Tube Sleeving: Corrugated Material Braided Sleeve

Fans: 
Fan Model: B12
Fan Number: 2
Fan Size: 120 x 120 x 25 mm
Fan Speed: 800 - 2150RPM
Fan Airflow: 81.68CFM (Max)
Fan Static Pressure: 4.0 mmH2O (Max)
Noise Level: 30.5dBa (Max)
Bearing Type: Fluid Dynamic Bearing
Fan Material: PBT+GF30 percent Frame / PC Blades

The Thermal Grizzly CPU Contact Frame Intel 1700 LT is a mounting aid for Intel mainboards with the LGA1700 socket. The contact frame replaces the standard ILM of the mainboard and improves the cooling performance of the CPU cooler through optimized contact pressure. The "Lite" version of the frame is manufactured using injection molding.

The Thermal Grizzly CPU Contact Frame Intel 1700 LT is the "Lite" version of the Intel 13th/14th Gen CPU Contact Frame and is manufactured by injection molding. The material used is an acrylonitrile-butadiene-styrene copolymer, which has a 15 percent glass fiber content for additional stability.

• Lower CPU temperatures
• Easy mounting
• Glass fiber reinforced ABS plastic
• Compatibility list online

The standard Integrated Loading Mechanism (ILM) has contact points located in the centre of the elongated CPU. Due to the resulting uneven contact pressure of the processor into the socket, the surface of the Integrated Heat Spreader (IHS) curves concavely. As a result, the base plate of the CPU cooler rests primarily on the edges of the IHS, so that the thermal "hotspot" in the middle of the CPU is not optimally covered.

The CPU Contact Frame Intel 1700 LT has a special inner contour to shift the contact pressure from the centre of the CPU to the edges during assembly. This avoids the concave curvature of the IHS. This results in CPU coolers resting better on the processor and a larger contact surface to dissipate the CPU's waste heat.

The installation of the Contact Frame is very simple and takes only a few steps. Depending on the CPU cooler and the CPU used, the temperatures of the processor can be noticeably reduced.

The CPU Contact Frame Intel 1700 LT is compatible with 12th, 13th and 14th generation processors for socket LGA1700. In addition, the frame is only compatible with CPUs whose Integrated Heat Spreader (IHS) has been ground down by no more than 0.2 millimetres. When mounting, make sure that there are no electronic components under the frame. This is especially important for mainboards with the Mini-ITX form factor.

Removing the mainboard's Integrated Loading Mechanism (ILM) may invalidate the mainboard manufacturer's warranty!