Thermal Grizzly Kapton Insulation Sheet and TG-Remove Bundle

This kit includes the Kapton Insulation Sheet and the TG-Remove (10mL).

Kapton Insulation Sheet is an assembly aid for electrically conductive thermal interface material (TIM). It is ideal for masking components such as SMDs on a CPU or GPU if they are to be used with Conductonaut liquid metal, Carbonaut or KryoSheet.

Kapton Insulation Sheet is a polyamide film that can be used at high temperatures up to 280 degrees Celsius and acts as an assembly aid for electrically conductive thermal interface material (TIM). It is ideal for covering components such as SMDs on a CPU or GPU if they are to be used with Conductonaut liquid metal, Carbonaut or KryoSheet.

Kapton Insulation Sheet is supplied packaged in 10 sheets of 5 Kapton adhesive strips each. Each individual adhesive strip is 10 mm wide and 60 mm long, with a thickness of 40 µm. It is recommended to thoroughly clean the contact surface to which the Insulation Sheet is applied.

Brief Informations:

50 adhesive strips 10x60mm
Thickness of 40µm
Electrically insulating
Max Temp: 280°C

Scope of delivery

10x carrier foil with 5 Kapton Insulation Sheets each

TG Remove is an acetone based nano-cleaner for the best cleaning results of thermal paste. In addition TG Remove has a degreasing effect which helps preparing the surface for new application e. g. on CPUs.

TG Remove was developed by Thermal Grizzly with the focus on removing thermal paste and residues in the most efficient way. The cleaner has deep cleansing properties which helps removing remaining conventional thermal paste but also liquid metal based thermal compounds such as Conductonaut.

The degreasing effect helps to prepare the surface for best liquid metal application.

Specifications:

Electrical Conductivity: 6,3·10−7 S*m−1
Typical Application: CPUs, GPUs,