Thermal Grizzly Conductonaut Extreme Thermal Compound (1g) and Cleaning Wipes Bundle

This kit includes the Conductonaut Extreme Liquid Metal Thermal Compound (1g) and Cleaning Wipes.

The Conductonaut Extreme Liquid Metal Thermal Compound is the further development of Conductonaut and was developed for applications with maximum power density. As a gallium-based liquid metal, Conductonaut Extreme is a metallic alloy that is liquid at room temperature, allowing for the minimum possible layer thickness.

Optimised thermal conductivity compared to conventional liquid metal
Increased material compatibility
Optimum application due to metal needle
Available in 1g or 5g syringes
Attention: Electrically conductive!
Do not bring into contact with aluminium!

Conductonaut Extreme thermal paste is technically not a thermal paste, as a paste consists of liquid and solid particles. The disadvantage of a paste is the solid particles. The surfaces of the base plate of the CPU cooler and the CPU heat spreader are uneven on a microscopic level. A traditional thermal paste fills these irregularities unevenly. Since the solid particles are larger than the gaps caused by the unevenness, more distance must be filled between the cooler and the heat spreader.

A heat-conducting medium in the form of liquid metal does not have this problem because it does not contain any "large" particles. As a result, the surfaces of the CPU cooler and heat spreader are closer together. At the same time, liquid metal has a constant heat transfer, while the larger solid particles in pastes usually conduct heat better than the paste parts. Liquid metal is preferable to thermal paste, especially in high energy applications

Conductonaut Extreme is manufactured to the highest quality standards at our production site in Germany. Our expertly trained staff continuously monitor the entire production chain. From testing the purity of the raw material, to the production of the liquid metal and filling, to packaging, production is subject to multiple quality controls.

Conductonaut Extreme is recommended as a high-end product for experienced users who are looking for a solution with best heat dissipation in the temperature range above 8°C. We recommend applying Conductonaut Extreme on nickel-plated copper as this offers the best long-term stability.

TG Cleaning Wipes are cleaning cloths for cleaning surfaces so that thermal conductive materials such as thermal pastes or liquid metal can adhere well and thus develop their full thermal conductivity. Assembly aids such as the TG Kapton Insulation Sheet or the TG Shield protective coating also adhere better to cleaned surfaces. TG Cleaning Wipes are packaged as a practical complete set of 40 cleaning cloths.

Clean and degreased surfaces are important so that thermal conductive materials such as thermal pastes or liquid metal can adhere well and thus develop their full thermal conductivity. This is where TG Cleaning Wipes come into play: cleaning cloths for cleaning surfaces. TG Cleaning Wipes contain ten double packs, each with two dry wipes and two wet wipes optimized for removing thermal paste residues.

Assembly aids such as the TG Kapton Insulation Sheet or the TG Shield protective coating also adhere better to cleaned surfaces. TG Cleaning Wipes are available as a practical complete set of 40 cleaning wipes, which are packaged in ten double packs of two dry wipes and two wet wipes.

Scope of delivery

10x TG Cleaning Wipes set (2 wet and 2 dry wipes)