The Lamptron TC20 PCI RGB controller and fan display provides extensive control over RGB lighting from fans or strips. For example, the RGB LED lighting of fans or strips with up to 20 watts can be connected and controlled via a 4-pin connector (12VGRB). The controller supplies a total of 60 LEDs with power, which is fed via a SATA connection and a Molex connection. So it is also possible here to connect several RGB LED products by daisy-chaining or with the aid of a Y-cable.
The features of the Lamptron TC20 PCI RGB controller and fan display at a glance
- Control board for RGB LED lighting
- Separate LC display with displays for temperature, voltage and fan speed
- Input and output for fans for speed determination
- A header for up to 60 RGB LEDs (12VGRB)
- Power supply via 4-pin Molex and SATA
- Including an infrared remote control
- Maximum control of ventilation & lighting
The lighting is controlled via the enclosed infrared remote control. With this the lighting modes and effects as well as the colors can be determined.
It can also connect a fan or loop through. The TC20 supports both fans with and without PWM. The fans are still controlled via the motherboard - the cable for looping through the signal is included with the controller. The display then shows the rotational speed of the connected fan.
Dimensions (board): 83 x 21 x 46 mm (W x H x D)
Dimensions (display): 100 x 12.5 x 32 mm (W x H x D)
Screen: 55mm x 18mm
Compatibility: 2x PCI slots (display)
Fan channels: 1
Voltage: 0 - 12 V
1x 4-pole molex
2x 2-pin temperature sensor
RGB LED Connections:
1x 4-pin RGB (12VGRB, up to 60 LEDs)