Koolance QD3 Male and Female Quick Disconnect Set No-Spill Coupling, Compression for 10mm x 13mm to G1/4", Silver

This bundle includes the male and female Koolance QDC Quick Disconnect No-Spill Coupling for 10mm ID, 13mm OD tubing to male G1/4".

Koolance patented quick disconnect no-spill coupling with automatic shutoff. 10mm (3/8in) ID, 13mm OD female straight connection with compression fitting.

After pulling the ring on the female QDC side, the quick-disconnect fittings will separate. Liquid on both sides will be automatically obstructed with approximately 0.2ml freed. Coolant volume lost upon disconnection will rise with internal pressure higher than 0.5kgf/cm2 (7psi).

General
Weight: 0.21 lb (0.10 kg)
Max No-Spill Pressure: 0.5kgf/cm2 (7psi)
Max Pressure Tolerance at 25C: 8kgf/cm2 (113.8psi)
Max Temperature Tolerance: 80C (176F)
Min Pressure Tolerance at 25C: -1.0kgf/cm2 (-14psi)
Min Storage Temperature (*No Freezing): -20C (-4F)
Seal Material: EPDM (Water/Glycol Liquids)
Wetted Materials: Brass, Stainless Steel, EPDM

Koolance patented quick disconnect no-spill coupling with automatic shutoff. G 1/4 BSPP (parallel) thread male fitting for screwing directly into a water block or other component.

General
Weight: 0.11 lb (0.05 kg)
Max No-Spill Pressure: 0.5kgf/cm2 (7psi)
Max Pressure Tolerance at 25C: 8kgf/cm2 (113.8psi)
Max Temperature Tolerance: 80C (176F)
Min Pressure Tolerance at 25C: -1.0kgf/cm2 (-14psi)
Min Storage Temperature (*No Freezing): -20C (-4F)
Seal Material: EPDM (Water/Glycol Liquids)
Wetted Materials: Brass, Stainless Steel, EPDM