EKWB EK-HTC Lignum Compression Fitting for EKWB Rigid Tubing, 12mm OD, Walnut

EK-HTC Lignum 12 (Hard Tubing Compression) Fittings are 12mm hard-tube compression fittings designed for use with solid tubing such as Acrylic and PETG. It features all the perks of an EK hard tubing compressions fitting with the added bonus, a uniquely luxurious wooden cover.

The locking ring prevents solid tube to be pulled out of the fitting by compressing the rubber gasket underneath the ring. Each fitting features a unique wood pattern which differs from every other fitting that is made.

The barb and the ring are made of CNC machined brass and the seal is made quality rubber O-rings.

The base fitting surface is smooth and has no adequate gripping surface, but the inside of the bard is socketed with a 9mm hex Allen key pattern. It's highly recommended to use an Allen Key 9mm (purchased separately) to prevent skin damage to the fingertips while installing the fitting. Please, be advised not to use excessive force when attaching fitting barbs using Allen Key 9mm in order to prevent damage to other liquid cooling products!

These fittings have guaranteed compatible with all other EK Water Blocks liquid cooling products.

Technical data:

- Thread: G1/4"" BSP; 4.5mm male thread length
- Supported tube: 12mm OD
- Outer diameter of a fitting: 20mm
- Installed height: 13mm
- Compatible solid tubing: Acrylic, PETG, Copper, Brass, Stainless Steel

PLEASE NOTE:

It's mandatory to use this fitting only with the correct sized tubing!
Do not use excessive force when attaching fitting barbs using Allen Key 9mm in order to prevent water block damage!
Do not use any tools to secure the locking ring to the fitting barb.
This product should NOT be installed with any aluminum Fluid Gaming parts!