Roman "der8auer" Hartung has now discovered that the Delid-Die-Mate 2 works not only with CPUs from Intel, but also with the Raven Ridge APUs. The heat spreader of the APU fits exactly into the shape of the Delid-Die-Mate 2. In order for the slide to rest evenly on the board of the CPU, Der8auer has designed a suitable adapter and added the slightly larger screw that was required by the adapter to this expansion kit.
Easy To Use:
To do this, place the APU with the heatspreader down into the Delid-Die-Mate 2. Then the adapter is placed upright with the recess for the screw up to the board. The slide is in turn clamped to the adapter. Now the M6 x 60 hex socket head screw is threaded through the rear end of the Delid Mate 2 as usual and screwed into the slide.
Now use the hex wrench to slowly move the carriage until the board has detached itself from the heatspreader. AMD's APUs require a little more power than the Intel CPUs. The heatspreader and CPU can then be cleansed from the thermal grease using the adapter. The adapter's lasered edges are relatively sharp, but will cause no damage to the materials of the CPU when used for cleanup of the adhesive from the heatspreader and the CPU.
*** Important warning! ***
Removing the CPU heatspreader is at your own risk and is always accompanied by the complete loss of the manufacturer's warranty!
Compatible with the Delid-Die-Mate and AMDs Ryzen 3 2200G and Ryzen 5 2400G