The wishlist name can't be left blank
alphacool-eisstation-reservoir-and-laing-ddc310-pump-0355ac011701on alphacool-eisstation-reservoir-and-laing-ddc310-pump-0355ac011701on (Alt1 Image) alphacool-eisstation-reservoir-and-laing-ddc310-pump-0355ac011701on (Alt2 Image) alphacool-eisstation-reservoir-and-laing-ddc310-pump-0355ac011701on (Alt3 Image) alphacool-eisstation-reservoir-and-laing-ddc310-pump-0355ac011701on (Alt4 Image) alphacool-eisstation-reservoir-and-laing-ddc310-pump-0355ac011701on (Alt5 Image) alphacool-eisstation-reservoir-and-laing-ddc310-pump-0355ac011701on (Alt6 Image) alphacool-eisstation-reservoir-and-laing-ddc310-pump-0355ac011701on (Alt7 Image) alphacool-eisstation-reservoir-and-laing-ddc310-pump-0355ac011701on (Alt8 Image)
alphacool-eisstation-reservoir-and-laing-ddc310-pump-0355ac011701on

Alphacool Eisstation Reservoir and Laing DDC310 Pump

Rating:
20% of 100
Product Highlights
  • Pump and reservoir combo
  • Threads: G1/4"
  • Includes DDC pump
  • Capacity: 250ml
  • Dimensions (LxWxH): 102 x 82 x 105mm
$75.99
Low Stock (Only 3 left)
Overview

With the Alphacool ice station you get a compact expansion tank that fits in almost every housing. The ice station is available in three versions: the DDC, D5 or DC-LT version.

Highlights

1. The lid is made of highly stable nylon
2. Three versions for all common pumps
3. Various mounting options
4. Illuminated logo and LED mounting options

The Alphacool ice station expansion tank is extremely compact and is available in three versions that are based on the desired pump. A D5, a DDC and a variant for the DC-LT pump are available. The pumps are installed in the base of the ice station and are not visible from the outside. The bottom of the ice station consists of a metal plate, which increases the stability of the ice station.

mounting options
It is possible to screw the ice station onto a 2.5 “bracket for SSD hard drives. It can also be installed in a 5.25 "bay. In both cases, the screws are attached using the special decoupling screws provided. This minimizes the transmission of vibrations to the housing and the overall operation is significantly quieter. Another mounting option is an included Velcro fastener. One part of the Velcro fastener is simply glued to the bottom of the ice station while the other part is glued in the housing. Then the ice station only has to be pressed with the bottom onto the counterpart in the housing. The size of the Velcro fastener ensures a secure position even during transport. The assembly can be done vertically and horizontally,

Connection
options An IN and OUT with G1 / 4 thread can be found on the head side with the illuminated logo. You can change the color of the logo with the optionally available modding kit. A G1 / 4 "and a G3 / 8" connection are available in the cover. The G3 / 8 "connection makes filling the ice station easier due to the larger diameter and can alternatively be used as a lighting module for 5 mm LEDs. Two additional 5 mm LED spaces are also located in the floor and illuminate the part filled with water from below.

A special highlight is the choice of materials for the ice station. The lower part is covered with a high-quality soft-touch surface, which conveys an outstanding feel and look. The upper part and the actual expansion tank are not made of simple and quickly breaking plexiglass, but of extremely stable nylon. While normal reservoirs made of glass or plexiglass can crack or break even with small drop heights or improper handling, it is almost impossible to destroy the transparent container of the ice station.

Technical data ice station

Dimensions (LxWxH): 102 x 82 x 105mm
Filling quantity: 250ml
Material: nylon / PMMA
In / Out: G1 / 4 "
Connection options: 3x G1 / 4 "/ 1x G3 / 8"
Power supply LED logo: 3 pin
Power supply pump: 3 pin
Lighting modules: 4x for 5mm LED
Technical data DDC-1T pump

Dimensions: (WxDxH) 62x62x38mm (without connections)
Motor design: electronically commutated ball motor
Nominal voltage: 12 V DC direct voltage
Perm. Voltage range 6 to 13.2 volts
Head at 12V: 3.7m
Max. Flow rate: 420L / h
Pumped media: water, water / glycol mixtures *
Max. System temperature: 60 ° C
Wetted parts: stainless steel 1.4571, PPS-GF40, EPDM O-rings,
Aluminum oxide, hard coal
Connections: 2x 10 / 8mm hose connection (no spout required)
scope of delivery

1x Alphacool ice station DDC incl.Alphacool Laing DDC-1T
1x metal floor
Mounting screws
4x decoupling screws
Self-adhesive Velcro mat

Details
More Information
Titan Rig SKU03-55-AC-0117-01-ON
Model13296
ConditionNew
Free Ground Shipping EligibleYes
Promo $14.95 2-Day Shipping EligibleYes
BrandAlphacool
LightingLED
PWMNo
Number of Pumps Supported1
Number of G 1/4" Ports3
Pump TypeDDC