The wishlist name can't be left blank

ARCTIC Liquid Freezer II 360 AIO CPU Cooler, 360mm Radiator

Product Highlights
  • Liquid Freezer II 360 AIO CPU Cooler performs effortlessly with over 200W of heat to be dissipated
  • Efficient developed PWM pump built alongside with a VRM fan
  • A premium class 38mm thick radiator with a high fin desnity
  • High quality fiber-reinforced, long EPDM tubing with integrated cable management
  • Includes three P12 fans with a high static pressure and PWM controls of 200-1800 RPM
In stock


The all-in-one cooling handles the entire cooling requirements - even of the most powerful processors from Intel® and AMD®. It performs effortlessly with over 200 W of heat to be dissipated, which is why your CPU can be kept cool even in extreme overlocking. When it comes to competitive products from leading cooler manufacturers, the Liquid Freezer II leaves them behind in terms of both performance and noise level.


Unlike many of our competitors, we went to great lengths to develop the water pump. The result is greatly reduced humming and higher efficiency. Like the other components, the pump is also PWM controlled. This leads to a significantly lower noise level at low and typical loads, but also to much lower power consumption, with a maximum of of 0.8 W at no load, 2.3 W under typical load and a maximum of 4.3 W under full load for the entire AiO.


Unlike most other all-in-one liquid cooling manufacturers, we rely on 38 mm thick radiators with a high fin density. This means that a larger amount of water can be used in the circuit, and the cooling surface can be significantly increased.

Water has a much higher heat capacity than aluminum or copper. This leads to a slower and up to 5 ° C lower temperature increase in the temporary turbo mode of modern CPUs.


Small fans have a reputation for being particularly loud and not very durable. However, we have developed a quiet and durable diagonal fan especially for the Liquid Freezer II and are 100% convinced that this 40 mm fan is just as durable as our other case fans. In the unlikely event that it should fail, our customer service team will send you a replacement free of charge and easily, without a need to replace the entire unit.

The fan is PWM-controlled and can cool your voltage transformers and the base area almost inaudibly by up to 15 ° C. This is especially effective in overclocking scenarios, inadequate VRM cooling or in housings with poor airflow, thus permitting continuously high loads. If sufficient VRM cooling is available, it can be switched off at will.


The fiber-reinforced, long EPDM tubing of the Liquid Freezer II enables installation even in large cases and effectively prevents the cooling liquid from evaporating, so that you do not have to worry about refilling the compact water cooling system.

It also hides the cables of your radiator fans thanks to sophisticated cable management. So you only have to connect a plug to the mainboard, saving valuable time during installation. In the end, you won't need to hide any more cables and your view is reduced to just the essentials.


Intel Socket: 1200, 115X, 2011-3, 2066 Square ILM
AMD Socket: AM4

Pump: 800 – 2000 RPM (PWM controlled)
Power Consumption: 0.5 W – 2.7 W (Pump + VRM Fan)
Cold Plate: Copper
Thermal Paste: MX-4 (0.8 g)

Fan Type: 3x ARCTIC P12 – 120 mm
Fan Speed: 200 – 1800 RPM
Fan Bearing: Fluid Dynamic Bearing
Noise Level: 0.3 Sone
Current: 0.08 A / 12 V DC
Airflow: 55.6 CFM
Static Pressure: 2.2 mm

H2OConnector: 4-pin-Connector

Radiator Dimensions (LxWxH): 398 x 120 x 38 mm
Pump (w/o tubes): 98 mm x 78 mm x 53 mm
Tube Diameter: Outer - 12.4 mm // Inner - 6.0 mm
Tube Length: 450 mm

More Information
Titan Rig SKU03-15-AX-0102-01-ON
AMD CPU SocketSocket AM4
Intel CPU SocketLGA 775, LGA 1150, LGA 1151, LGA 1155, LGA 1156, LGA 1200, LGA 2011-v3, LGA 2011, LGA 2066
Radiator Size360 (120mm Fan x 3)