Splitter for RGBpx lighting control and ARGB components with external power supply.
This splitter can be used to connect up to 12 lighting components to a single RGBpx or ARGB
output. All twelve outputs are connected in parallel, i.e. all connected components are controlled identically. In order not to overload the connected RGBpx or ARGB output due to the high number of connected LEDs, the power supply for all outputs is via a SATA power supply plug. The digital RGB control signal is amplified for safe control of the connected components on the board.
The input signal can be fed either via an RGBpx connector or a motherboard-typical connector.
A suitable RGBpx connection cable, as well as an adapter for connection to many motherboards and controllers from third-party providers, is included.
A total of twelve outputs are available, all of which can be used simultaneously: - four RGBpx connectors - four motherboard-typical ARGB connectors - four connectors for ARGB lighting on fans from the manufacturer Corsair (series QL, LL, HD, ML)
A maximum of 4.5 amps are available for the connected LEDs. This corresponds to the maximum permissible current at 5 volts via a SATA power supply connector. The power consumption of ARGB products varies depending on the type of LED and the colors displayed, as a guideline, no more than a total of 200 LEDs should be connected.
Scope of delivery:
PCB Connection cable RGBpx, approx. 50 cm
RGBpx Adapter plug for mainboard connection
Self-adhesive Velcro fastening material