The wishlist name can't be left blank
alphacool-nexxxos-ut60-full-copper-x-flow-80mm-single-radiator-0330ac024901on alphacool-nexxxos-ut60-full-copper-x-flow-80mm-single-radiator-0330ac024901on (Alt1 Image) alphacool-nexxxos-ut60-full-copper-x-flow-80mm-single-radiator-0330ac024901on (Alt2 Image) alphacool-nexxxos-ut60-full-copper-x-flow-80mm-single-radiator-0330ac024901on (Alt3 Image) alphacool-nexxxos-ut60-full-copper-x-flow-80mm-single-radiator-0330ac024901on (Alt4 Image) alphacool-nexxxos-ut60-full-copper-x-flow-80mm-single-radiator-0330ac024901on (Alt5 Image)
alphacool-nexxxos-ut60-full-copper-x-flow-80mm-single-radiator-0330ac024901on

Alphacool NexXxoS UT60 Full Copper X-Flow 80mm Single Radiator

Product Highlights
  • The 80 mm NexXxoS radiators have been specially developed for server racks and workstations
  • Thanks to their low height of just 80 mm and the special M3 mounting holes on the top and bottom, they fit perfectly into 2U server racks
  • Alternatively, the radiators can also be mounted in the classic way via the fan mounting locations
  • Material cooling fins, antechambers & cooling channels: copper
  • Dimensions L x W x H: 123 x 60 x 80 mm
$59.99
In stock
Overview

Alphacool is an internationally renowned company in the field of water cooling solutions for industrial and end customers that continually develops new products and improvements that serve to provide optimal cooling performance and the visual enhancement of home and company computers and servers.

Perfect for workstations and servers
The 80 mm NexXxoS radiators have been specially developed for server racks and workstations. Thanks to their low height of just 80 mm and the special M3 mounting holes on the top and bottom, they fit perfectly into 2U server racks. Alternatively, the radiators can also be mounted in the classic way via the fan mounting locations. M3 screws are also required here.

No compromise on materials
Alphacool basically uses copper for the materials of the NexXxoS radiators. Alphacool is the only manufacturer in the world where all water-carrying components are made of pure copper. From the antechambers to the water channels and the cooling fins, everything is made of pure copper. Only the connecting threads are made of pure brass, as pure copper would be too soft for the threads and would give way over time.

Outstanding cooling performance
There are several approaches that Alphacool uses to increase cooling performance. Of course, copper as a material base offers the best properties for dissipating heat. Aluminum, which is often used in inexpensive products, can of course not hold a candle to copper in terms of heat capacity and thermal conductivity.
The copper cooling fins are painted extremely thinly compared to most other manufacturers. This does not reduce the cooling performance. Because a thick coating acts like insulation. The fin spacing is also optimally chosen at 10 FPI. This means the fins are close enough together to create enough cooling surface, but also far enough apart so as not to impede the airflow. In addition, all cooling fins are covered with flaps to ensure controlled air turbulence. This means that the air flowing through can absorb and transport heat away from the cooling fins much better.

X-Flow instead of U-Flow
The water flow is U-shaped in classic PC radiators. This means that the water inlet and outlet are on one side of the radiator. This has certain advantages in the normal PC area. However, it is difficult to build a reasonable water cycle in an extremely flat server in this way. Thanks to the X-Flow technology, the entrance and exit are on opposite sides. This makes it very easy to create a circular water course in the server rack. You go out to one side, directly into a CPU, possibly then into one or more graphics cards and then back into the radiator on the other side.

Versatile connection options
Each NexXxuS 80 mm X-Flow radiator is generously equipped with three connection options on both sides. This means that almost every conceivable assembly position can be implemented. The connections are located in the opposite position on each side and once at the head ends of the radiators.
To ensure that there are no unpleasant surprises when dimensioning, Alphacool has developed special patented locking screws that are flush with the radiator. Previous solutions always protruded beyond the length or width of the radiator because they were not recessed.

Technical data
L x W x H: 123 x 60 x 80 mm (+/- 3% tolerance in the area of ??the antechambers)
Material cooling fins, antechambers & cooling channels: copper
Material thread: Brass
Outer casing material: stainless steel
Connections: 6x G1/4" IN/OUT (max. 5mm thread length)
Possible fan size: 80mm
Possible fan occupancy: 1x one-sided / 2x both-sided
Thread size fan assembly: M3
Pressure tested: 0.8 bar
Maximum working temperature: 60 degrees C
Fin spacing: 10FPI

Details
More Information
Titan Rig SKU03-30-AC-0249-01-ON
Model14294
ConditionNew
BrandAlphacool
Number of G 1/4" Ports6
Radiator Size80 (80mm x 1)
Radiator Thickness60mm
Fins Per Inch (FPI)10
Product SeriesNexXxos
Promo Express Shipping EligibleYes
Free Ground Shipping EligibleYes
Enterprise ReadyNo