The Alphacool Eiswolf 2 is Alphacool's first full-cover GPU AIO water cooler. It is based on the Alphacool GPX Eisblock Aurora GPX water cooler, a pump unit and a 360mm NexXxoS ST30 full copper radiator equipped with the Alphacool Aurora Rise Digital RGB fans.
Full cover cooler?
The Eiswolf 2 graphics card AIO water cooler not only cools the GPU with water but also all relevant components that require active cooling. This includes the graphics memory, the voltage converters and, if necessary, other components that require direct cooling. By using the Eisblock GPX Aurora water cooler as a base, the cooling performance is identical to that of a DIY graphics card water cooler
The radiator is made entirely of chrome-plated copper. Chrome plating is much harder than nickel plating and therefore less sensitive to acids, scratches and damage. This completely eliminates the risk of nickel plating flaking off. In addition, chrome plating looks much more homogeneous and offers a shine that cannot be achieved with nickel plating. So far, chrome-plated coolers have only been used in the industrial sector in areas where the coolers are subject to extreme influences.
The Eiswolf 2 has a pump unit in place of the normal connection terminal. This pump unit houses the DC-LT 2 pump. An improved and quieter version of the well-known DC-LT Low Noise Ceramic Pump. Despite its apparent size, the bulky-looking pump unit is only 5 mm wider than a normal connection terminal.
Connections and hoses
As with all new AIO units, Alphacool also uses only TPV hoses from the Enterprise Solution series for servers and workstations with the Eiswolf 2. The hoses are made of EPDM/PP and are extremely heat-resistant, durable and free from plasticizers. All connections are also based on the Enterprise Solution series and visually match the TPV hoses perfectly.
By using the quick-release fastener, the Eiswolf 2 can be connected to another Alphacool AIO unit to create a larger circuit. Alphacool offers various pre-filled components with which the circuit can be easily expanded. For safety, the quick-release fasteners are firmly screwed together and not just plugged together.
lighting and fans
The Eiswolf 2 cooler has digital RGB LED lighting, also called addressable RGB LEDs. They run across the entire back of the graphics card cooler and ensure that the water cooler is fully illuminated. The pump unit is more discreet and offers a green glowing logo for Nvidia and a red glowing logo for AMD cards. The name "Eiswolf" on the pump unit remains unlit, discreetly in the background. The 120mm Aurora Rise Fan is used as the fan. Due to the special blade design, the fan is extremely quiet and the addressable RGB LEDs ensure brilliant lighting. The Alphacool Aurora Rise fan impresses with a max. static pressure of 3.17mm/H2O and offers a max. air flow of 119.8m3/h. The PWM control allows the fan to be controlled over a wide speed range. It also offers zero control. It can therefore be regulated down to 0 rpm and then starts at approx. 350 rpm.
As with all AIO units, Alphacool uses radiators from the globally popular NexXxoS series. The full copper radiators offer a much higher cooling capacity than aluminum radiators and have made a significant contribution to Alphacool's worldwide success.
The combination of all components results in a solution that is as easy to install as an AIO, but offers the performance of a pre-assembled and pre-filled custom loop.
Due to storage and transport, the liquid in the Eiswolf 2 AIO is not in motion for a long period of time. The ingredients of the liquid can deposit and lead to a brownish discoloration. As soon as the pump starts operating, the ingredients mix again and the liquid regains almost its clear color. This fact does not constitute a reason for complaint, since neither the performance nor the function of the AIO are affected. If the discoloration of the coolant does not disappear after the AIO has been put into operation, please contact our support team by email ([email protected]). There you will get quick and uncomplicated help.
- GIGABYTE GeForce RTX 4090 Gaming OC 24G, 24GB GDDR6X (GV-N4090GAMING OC-24GD)
- GIGABYTE AORUS GeForce RTX 4090 Master 24G, 24GB GDDR6X (GV-N4090AORUS M-24GD)
|Dimensions (L x W x H)||395 x 124 x 30mm (+/- 3%)|
|Material cooling fins, antechambers & cooling channels||copper|
|Material outer case||Stainless steel|
|G 1/4" thread||2 x for hoses (+ 1x Fillport G1/4")|
|Possible fan size||120mm|
|Possible fan assembly||3 x one-sided / 6 x two-sided|
|Technical data cooler with pump|
|Dimensions (L x W x H)||233.30 x 162.06 x 47.40mm|
|Material radiator floor||Chromed copper|
|connections||2 x G1/4"|
|pump type||DC LT 2|
|speed pump||2600 rpm (+/- 10%)|
|ingredient 1||Distilled water (CAS number 7732-18-5)|
|ingredient 2||Glysantin (CAS number 1017-21-1)|
|For temperature range||-15ºC / +90ºC|
|Technical data Quick release coupling|
|Dimensions (L x D)||95x27mm|
|hose size||12.7 / 7.6mm|
|L x D Straight connectors||24x18mm|
|Number of straight connections||2x|
|L x W x H 90° connections||35x27x17mm|
|Number of 90° connections||2x|
|Suitable for hose size||12.7 / 7.6mm|
|Material hose||TPV (EPDM/PP)|
|hose size||12.7 / 7.6mm|
|degree of hardness||35 Shore A to 50 Shore D|
|working temperature||-50 to +155 °C|
|number of revolutions||0 - 2500RPM|
|air flow||119.8 m³/h|
|Connection fan||4-pin PWM|
|Connection Digital aRGB||3-pin JST + 3-pin 5V|
|Dimensions (L x W x H)||120x120x25mm|
|Maximum working temperature||60°C|