The wishlist name can't be left blank

Alphacool Eisbaer Quick-Connect Extension Kit

Product Highlights
  • Quick-Connect Extension Kit
  • tubing length: 32cm
  • Material Quick Connector: Nylon
  • G1/4" Threads
  • tubing size: 11/8mm
Out of stock

With the “Eisbaer” Quick-Connect Extension Kit, expanding an “Eisbaer” or “Eiswolf” GPX-Pro cooler loop with additional components is simple. For example, it’s easy to add another radiator, an additional cooler or any other components.

The kit consists of two 32cm-long hoses in 11/8 format, encased in anti-kink springs. This prevents bending in the hoses, and thereby prevents interruptions to the flow of water. Safety is our top priority.

Two ends have 90° angled pieces, pre-installed on the hoses. The only thing you need to do is screw these into the corresponding G1/4” threads. On the other end are the ends of two quick-release safety locks from the Alphacool HF series, just like the ones found on the “Eisbaer” or “Eiswolf”. That means all you have to do is open the quick-release locks on the “Eisbaer” or “Eiswolf” and screw them together with the corresponding parts in this kit and an additional product for extension, and your loop is complete - after it’s been filled, of course. For that, this kit includes a squeeze bottle with 250mL of osmosis filtered water. With the squeeze bottle, the loop can easily be filled at the designated spots. On the “Eisbaer”, for example, this would be the fill port on the “Eisbaer” cooler.

Technical Details:

tubing length: 32cm
Material Quick Connector: Nylon
Colour: Black
G1/4" Threads
tubing size: 11/8mm
Pre-filled: 250ml osmosis water
Scope of delivery:

Alphacool Eisbaer Quick-Connect Extension Kit
Attention: Please use only in conjunction with clear transparent water cooling fluids. The particles and additives in Pastel fluids can clog and permanently damage water cooling products such as radiators, pumps, This can result in voiding the manufacturer's warranty as well.

Use is therefore at one’s own risk.

Notice for expansion:
Please take care not to mix up the IN and OUT ports. On the “Eisbaer”, the “outlet” is marked in “red” and the “inlet” in “blue”. On the components to be connected, it is the opposite. The coupling with the “blue” marking denotes the “outlet” and the coupling with the “red” marking is the “inlet”. This is important as in many coolers the flow direction is crucial for optimal cooling performance.

More Information
Titan Rig SKU03-20-AC-0185-01-ON
Free Ground Shipping Eligible (restrictions apply)Yes
Special 2day Shipping EligibleYes
Color (General)Black
Tubing Size8mm ID - 11mm OD (5/16" ID - 7/16" OD)
Thread TypeG1/4"