Alphacool Eisbaer Pro ES 2U 80mm Triple HPE CPU AIO and Thermal Grizzly AM5 Contact Frame Bundle

This bundle includes the Eisbaer Pro ES 2U 80mm Triple HPE AIO and the Thermal Grizzly AM5 Contact Frame.

The Eisbaer Pro ES 2U 80mm Triple HPE AIO water cooling has an extremely powerful NexXxos 80mm Triple solid copper radiator, which is equipped with the high-throughput 80mm ES fans. All components come from the Enterprise Solutions water cooling range. The Eisbaer Pro ES 2U 80mm Triple HPE AIO is a professional all-in-one water cooling system that is easy to install and offers the performance of a custom loop.

Powerful full copper radiator
The NexXxoS radiators with a height of 80mm were specially developed for server racks and workstations. Due to the special M3 mounting holes on the top and bottom and the low height of only 80mm, the radiator fits perfectly in 2U server racks. The copper cooling fins are painted extremely thin compared to other manufacturers so as not to impair the cooling performance. The fin spacing of 10 FPI has been optimally chosen so that the fins are close enough together to offer a lot of cooling surface, but also far enough apart not to disturb the airflow. All cooling fins are covered with flaps to ensure controlled air turbulence, which enables better heat dissipation.

Optimum cooling
The bottom of the cooler covers the entire area of the respective processors. With a size of around 55 x 42mm, the area of the cooling fins surpasses all known processor cores. Thus, all hotspots of a CPU can be flushed directly with water and optimally cooled. The cooling fins are 0.4mm thick and are optimally spaced 0.4mm apart. There are a total of 58 cooling fins on the cooler floor. The cooler base is only 3mm thick, which means that the waste heat can reach the water and be dissipated as quickly as possible.

Reliable pump
The Eisbaer Pro ES cooler uses the very compact DC-LT 2 pump, which offers enough power to integrate other components such as GPU water coolers or radiators into the water cycle.

High-quality TPV hoses
The hose connectors come from the normal DIY segment and use a G1/4" thread, making them easy to replace. The TPV hose does not need plasticizers and, in contrast to classic PVC hoses, does not deform at high temperatures.

Compatibility:
Intel: 1700 / 2011 / 2011-3 / 2066 / 3647 Narrow & Square / LGA 4189 / LGA 1851
AMD: TR4 / sTRX4 / SP3 / sWRX8 / AM4 / AM5

Technical data cooler with pump
Dimensions (L x W x H): 64 x 79 x 54.3mm
Material radiator floor: nickel-plated copper
Material housing: Acrylic
Connections: 2x G1/4" (+ 1x fill port G1/4")
Pump type: DC LT2
Speed pump: 2600 rpm (+/- 10%)
Head: 1m
Maximum flow: 72L/hr
Tension: 6-13.5VDC
Power consumption: 3.2W
Pressure tested: 0.8 bars
Maximum working temperature: 60°C

Combination of contact frame and CPU guard
The AM5 Contact & Sealing Frame is a combination of Contact Frame and CPU-Guard for AMD's Ryzen-7000 processors. As a Contact Frame, the AM5 Contact & Sealing Frame creates optimal contact pressure of the CPU into the socket, while an optional, included inlay made of silicone foam serves to protect the exposed components on the CPU.

• Encloses the heatspreader
• Replaces the SAM of the mainboard
• Made of anodized aluminium

Optimized Inner Contour for Even Pressure Distribution
The precision-milled inner contour of the AM5 Contact & Sealing Frame creates multiple contact points to the heatspreader compared to the standard SAM. These contact points distribute the contact pressure on the CPU evenly. This ensures that the contact surfaces of the CPU rest uniformly on the pins of the socket. For example, problems with the detection of system memory can be avoided this way.

Innovative Silicone Foam Inlay for Protection and Sealing
The AM5 Contact & Sealing Frame comes with a silicone foam inlay. This can be placed on the PCB of the processor, similar to the AMD Ryzen 7000 CPU Guard. When installing the AM5 Contact & Sealing Frame, the gap between the heatspreader and the aluminium frame is sealed by the silicone foam by pressing the foam onto the PCB. This prevents thermal paste or liquid metal from getting onto the CPU's unprotected components. The foam inlay is optional when used with thermal pastes, but mandatory when used with liquid metal.

User-Friendly Assembly with Clear Marking and Compatibility
To simplify installation, there is a corresponding marking on the top of the AM5 Contact & Sealing Frame. Since the socket has a bulge on the upper - the "northern" - edge, mounting is only possible in one orientation. Four screws are included for mounting the frame and compatibility with the Thermal Grizzly AM5 backplates is given.