Alphacool Eisbaer Pro ES 2U 80mm Triple HPE CPU AIO and Thermal Grizzly 1851 Contact Frame Bundle

This bundle includes the Eisbaer Pro ES 2U 80mm Triple HPE AIO and the Thermal Grizzly 1851 Contact Frame.

The Eisbaer Pro ES 2U 80mm Triple HPE AIO water cooling has an extremely powerful NexXxos 80mm Triple solid copper radiator, which is equipped with the high-throughput 80mm ES fans. All components come from the Enterprise Solutions water cooling range. The Eisbaer Pro ES 2U 80mm Triple HPE AIO is a professional all-in-one water cooling system that is easy to install and offers the performance of a custom loop.

Powerful full copper radiator
The NexXxoS radiators with a height of 80mm were specially developed for server racks and workstations. Due to the special M3 mounting holes on the top and bottom and the low height of only 80mm, the radiator fits perfectly in 2U server racks. The copper cooling fins are painted extremely thin compared to other manufacturers so as not to impair the cooling performance. The fin spacing of 10 FPI has been optimally chosen so that the fins are close enough together to offer a lot of cooling surface, but also far enough apart not to disturb the airflow. All cooling fins are covered with flaps to ensure controlled air turbulence, which enables better heat dissipation.

Optimum cooling
The bottom of the cooler covers the entire area of the respective processors. With a size of around 55 x 42mm, the area of the cooling fins surpasses all known processor cores. Thus, all hotspots of a CPU can be flushed directly with water and optimally cooled. The cooling fins are 0.4mm thick and are optimally spaced 0.4mm apart. There are a total of 58 cooling fins on the cooler floor. The cooler base is only 3mm thick, which means that the waste heat can reach the water and be dissipated as quickly as possible.

Reliable pump
The Eisbaer Pro ES cooler uses the very compact DC-LT 2 pump, which offers enough power to integrate other components such as GPU water coolers or radiators into the water cycle.

High-quality TPV hoses
The hose connectors come from the normal DIY segment and use a G1/4" thread, making them easy to replace. The TPV hose does not need plasticizers and, in contrast to classic PVC hoses, does not deform at high temperatures.

Compatibility:
Intel: 1700 / 2011 / 2011-3 / 2066 / 3647 Narrow & Square / LGA 4189 / LGA 1851
AMD: TR4 / sTRX4 / SP3 / sWRX8 / AM4 / AM5

Technical data cooler with pump
Dimensions (L x W x H): 64 x 79 x 54.3mm
Material radiator floor: nickel-plated copper
Material housing: Acrylic
Connections: 2x G1/4" (+ 1x fill port G1/4")
Pump type: DC LT2
Speed pump: 2600 rpm (+/- 10%)
Head: 1m
Maximum flow: 72L/hr
Tension: 6-13.5VDC
Power consumption: 3.2W
Pressure tested: 0.8 bars
Maximum working temperature: 60°C

The Intel 1851 CPU Contact Frame V1 is the version of the well-known mounting aid tailored to Intel motherboards with the LGA1851 socket. By using the Intel 1851 CPU Contact Frame V1, the concave bending of the CPU’s Integrated Heat Spreader (IHS) caused by the standard Integrated Loading Mechanism (ILM) is avoided. This results in better contact between the CPU cooler and the IHS, improving cooling performance.

• Reduction of CPU temperatures
• Easy to install
• Anodized aluminum

Installing the contact frame is very simple and requires only a few steps. First, the motherboard's Integrated Loading Mechanism (ILM) must be removed. Depending on the CPU cooler and the CPU used, processor temperatures can be noticeably reduced. When switching from the Reduced-Load ILM (RL-ILM) used on some LGA1851 motherboards, temperature reductions of up to 4°C can be expected, and up to 6°C when switching from the standard ILM.

The Intel 1851 CPU Contact Frame V1 is compatible with Intel Core Ultra 200 Series processors for the LGA1851 socket. Additionally, the frame is compatible with CPUs whose Integrated Heat Spreader (IHS) has been sanded down by no more than 0.2 millimeters. Care must be taken during installation to ensure no electronic components are located under the frame, especially with Mini-ITX form factor motherboards.

Removing the Integrated Loading Mechanism (ILM) from the motherboard may void the manufacturer's warranty for the motherboard!