Alphacool Eisbaer Pro ES 2U 80mm Triple HPE CPU AIO and Thermal Grizzly 1700 Contact Frame Bundle

This bundle includes the Eisbaer Pro ES 2U 80mm Triple HPE AIO and the Thermal Grizzly 1700 Contact Frame.

The Eisbaer Pro ES 2U 80mm Triple HPE AIO water cooling has an extremely powerful NexXxos 80mm Triple solid copper radiator, which is equipped with the high-throughput 80mm ES fans. All components come from the Enterprise Solutions water cooling range. The Eisbaer Pro ES 2U 80mm Triple HPE AIO is a professional all-in-one water cooling system that is easy to install and offers the performance of a custom loop.

Powerful full copper radiator
The NexXxoS radiators with a height of 80mm were specially developed for server racks and workstations. Due to the special M3 mounting holes on the top and bottom and the low height of only 80mm, the radiator fits perfectly in 2U server racks. The copper cooling fins are painted extremely thin compared to other manufacturers so as not to impair the cooling performance. The fin spacing of 10 FPI has been optimally chosen so that the fins are close enough together to offer a lot of cooling surface, but also far enough apart not to disturb the airflow. All cooling fins are covered with flaps to ensure controlled air turbulence, which enables better heat dissipation.

Optimum cooling
The bottom of the cooler covers the entire area of the respective processors. With a size of around 55 x 42mm, the area of the cooling fins surpasses all known processor cores. Thus, all hotspots of a CPU can be flushed directly with water and optimally cooled. The cooling fins are 0.4mm thick and are optimally spaced 0.4mm apart. There are a total of 58 cooling fins on the cooler floor. The cooler base is only 3mm thick, which means that the waste heat can reach the water and be dissipated as quickly as possible.

Reliable pump
The Eisbaer Pro ES cooler uses the very compact DC-LT 2 pump, which offers enough power to integrate other components such as GPU water coolers or radiators into the water cycle.

High-quality TPV hoses
The hose connectors come from the normal DIY segment and use a G1/4" thread, making them easy to replace. The TPV hose does not need plasticizers and, in contrast to classic PVC hoses, does not deform at high temperatures.

Compatibility:
Intel: 1700 / 2011 / 2011-3 / 2066 / 3647 Narrow & Square / LGA 4189 / LGA 1851
AMD: TR4 / sTRX4 / SP3 / sWRX8 / AM4 / AM5

Technical data cooler with pump
Dimensions (L x W x H): 64 x 79 x 54.3mm
Material radiator floor: nickel-plated copper
Material housing: Acrylic
Connections: 2x G1/4" (+ 1x fill port G1/4")
Pump type: DC LT2
Speed pump: 2600 rpm (+/- 10%)
Head: 1m
Maximum flow: 72L/hr
Tension: 6-13.5VDC
Power consumption: 3.2W
Pressure tested: 0.8 bars
Maximum working temperature: 60°C

The Thermal Grizzly CPU Contact Frame Intel 1700 LT is a mounting aid for Intel mainboards with the LGA1700 socket. The contact frame replaces the standard ILM of the mainboard and improves the cooling performance of the CPU cooler through optimized contact pressure. The "Lite" version of the frame is manufactured using injection molding.

The Thermal Grizzly CPU Contact Frame Intel 1700 LT is the "Lite" version of the Intel 13th/14th Gen CPU Contact Frame and is manufactured by injection molding. The material used is an acrylonitrile-butadiene-styrene copolymer, which has a 15 percent glass fiber content for additional stability.

• Lower CPU temperatures
• Easy mounting
• Glass fiber reinforced ABS plastic
• Compatibility list online

The standard Integrated Loading Mechanism (ILM) has contact points located in the centre of the elongated CPU. Due to the resulting uneven contact pressure of the processor into the socket, the surface of the Integrated Heat Spreader (IHS) curves concavely. As a result, the base plate of the CPU cooler rests primarily on the edges of the IHS, so that the thermal "hotspot" in the middle of the CPU is not optimally covered.

The CPU Contact Frame Intel 1700 LT has a special inner contour to shift the contact pressure from the centre of the CPU to the edges during assembly. This avoids the concave curvature of the IHS. This results in CPU coolers resting better on the processor and a larger contact surface to dissipate the CPU's waste heat.

The installation of the Contact Frame is very simple and takes only a few steps. Depending on the CPU cooler and the CPU used, the temperatures of the processor can be noticeably reduced.

The CPU Contact Frame Intel 1700 LT is compatible with 12th, 13th and 14th generation processors for socket LGA1700. In addition, the frame is only compatible with CPUs whose Integrated Heat Spreader (IHS) has been ground down by no more than 0.2 millimetres. When mounting, make sure that there are no electronic components under the frame. This is especially important for mainboards with the Mini-ITX form factor.

Removing the mainboard's Integrated Loading Mechanism (ILM) may invalidate the mainboard manufacturer's warranty!