Alphacool Eisbaer Aurora LT240 CPU AIO and Thermal Grizzly 1851 Contact Frame Bundle

This bundle includes the Eisbaer Aurora LT240 CPU AIO and the Thermal Grizzly 1851 Contact Frame.

The Eisbaer LT Aurora CPU AIO water cooling system offers extremely good cooling performance thanks to the full copper radiator. The components used come from the classic DIY water cooling area and are also largely used in enterprise products for servers. The quick-release fastener allows the Eisbaer LT Aurora to be expanded with additional components.

The core is the DC-LT 2 pump.
The very compact and small DC-LT 2 pump has been further optimized compared to its predecessor. The impeller sits floating on a ceramic axis and is supported by two magnets. A 3-phase sine control ensures that the pump runs much more smoothly, which contributes significantly to minimizing noise. The pump offers enough power to integrate another component, such as a GPU water cooler or another radiator, into the circuit. Ideally, it is coupled with an Eiswolf 2 GPU AIO water cooling system. This also uses a DC-LT2 pump.

DIY connections and ES hoses
The hose connections come from the normal DIY segment and therefore use a G1/4" thread. Therefore, they can be replaced very easily. The black TPV hose, like the connectors, comes from the Alphacool ES series, which is primarily used in servers and workstations. The hose does not contain any plasticizers and, unlike classic PVC hoses, does not deform even at high temperatures. The quick-release fastener is not made of heavy brass, but of extremely light, durable and robust nylon. The quick-release fastener is compatible with many other models from the Alphacool product line.

Cooler
As with all Alphacool products, the cooler base is made of nickel-plated copper and is equipped with very fine cooling fins that are distributed across the entire base. A nozzle plate ensures an accelerated flow over the cooling fins, which increases the cooling performance. The water flow is optimized so that all areas of the cooler base are cooled evenly.

Full digital RGB equipment
The cooler pump unit and the fans are fully equipped with digital RGB LEDs, also known as addressable RGB or aRGB. Extensive effects can be set using the included controller or a digital RGB control on the mainboard. The illuminated polar bear on the cooler pump unit creates a nice visual effect. To make it easier to control via a controller, the fans and pumps can be connected in series as a daisy chain. This ensures clean wiring of the individual LED components.

Compatibility:
AMD: AM2 / AM2+ / AM3 / AM3+ / AM4 / AM5 / FM1 / FM2 / FM2+ / SP3 / SP6 / sTRX4 / sWRX8
Intel: LGA 1150 / LGA 1151 / LGA 1155 / LGA 1156 / LGA 1200 / LGA 1700 / LGA 2011 / LGA 2011-3 / LGA 2066 / LGA 755 / LGA 1851

Technical data Radiator
L x W x H: 274 x 120 x 25 mm (+/- 3%)
Material cooling fins, pre-chambers & cooling channels: copper
Material thread: Brass
Material outer casing: Stainless steel
Connections: 2x G1/4"

Technical data cooler with pump
L x W x H: 69x69x45mm
Radiator base material: Nickel-plated copper
Housing material: PMMA
Connections: 2x G1/4“ (+ 1x fill port G1/4“)
Pump Type: DC-LT2
Pump speed: 2600 rpm (+/- 10%)

The Intel 1851 CPU Contact Frame V1 is the version of the well-known mounting aid tailored to Intel motherboards with the LGA1851 socket. By using the Intel 1851 CPU Contact Frame V1, the concave bending of the CPU’s Integrated Heat Spreader (IHS) caused by the standard Integrated Loading Mechanism (ILM) is avoided. This results in better contact between the CPU cooler and the IHS, improving cooling performance.

• Reduction of CPU temperatures
• Easy to install
• Anodized aluminum

Installing the contact frame is very simple and requires only a few steps. First, the motherboard's Integrated Loading Mechanism (ILM) must be removed. Depending on the CPU cooler and the CPU used, processor temperatures can be noticeably reduced. When switching from the Reduced-Load ILM (RL-ILM) used on some LGA1851 motherboards, temperature reductions of up to 4°C can be expected, and up to 6°C when switching from the standard ILM.

The Intel 1851 CPU Contact Frame V1 is compatible with Intel Core Ultra 200 Series processors for the LGA1851 socket. Additionally, the frame is compatible with CPUs whose Integrated Heat Spreader (IHS) has been sanded down by no more than 0.2 millimeters. Care must be taken during installation to ensure no electronic components are located under the frame, especially with Mini-ITX form factor motherboards.

Removing the Integrated Loading Mechanism (ILM) from the motherboard may void the manufacturer's warranty for the motherboard!