Alphacool DC-LT 2600 Ceramic 12V Pump, Reservoir and Pump Top Bundle

This bundle includes the Alphacool DC-LT ceramic 12 Volt pump, DC-LT Plexi (Acrylic) Top, and Reservoir.

Alphacool DC-LT ceramic 12 Volt pump, the compact pump with lots of steam under the hood! Water cooling generally is not only for Big towers and the high-end sector. Barebones, HTPC and Desktop systems also greatly profit greatly from a liquid cooling system. Here extreme overclocking is not the goal, but rather total silence in the system. Besides the fans, which are extremely quiet to silent thanks to the water cooling system, the pumps are another noise emitting element. Not with this pump! From the start much quieter than the majority of the competition and still powerful enough to cool CPU and GPU with ease. A ceramic shaft promises a long lifespan and permanently smooth operation. And the size? The outer dimensions are roughly the same as of a 2 Euro coin (about 5mm larger in radius). This is the currently most compact water cooling pump for computer cooling!

The DC-LT Plexi (Acrylic) Top is the ideal top for the Alphacool DC-LT pump. This top is designed in such a way to allow mounting on the Alphacool DC-LT pump. With the top, it is possible to integrate this miniature pump into your water cooling loop via 1/4" threads. The inlet fitting can be connected on the side or on top of the unit. The outlet is then connected to the opposite side. All silent system enthusiasts will be happy to hear that threads were implemented to allow decoupling with e.g. Item No. 13701. With these decouplers the pump and top can be mounted in a 3.5" drive bay. Thought was also given to the case modders, as a 5mm LED hole near the outlet allows unique lighting effects for your system.

The Reservoir for DC-LT Pump Top is ideal addition to the Alphacool DC-LT ceramic 12 Volt pump equipped with a Alphacool DC-LT Plexi top. The Alphacool reservoir individual for DC-LT pump is another module for expansion and improvement of the Alphacool DC-LT ceramic 12 Volt pump. As basis a pump already equipped with an Alphacool DC-LT Plexi top is used. With only few steps this pump can now be additionally equipped with a reservoir. Simply place the reservoir on the included ring gasket and tighten the four also included screws in the corners: Done! 1/4" threads are machined into the side of the reservoir. They can be used as an Inlet or for a lighting module.