Alphacool Core Ocean T38 CPU AIO, 120mm Radiator

With the Core Ocean AiO, Alphacool presents an all-in-one solution that, thanks to the excellent price-performance ratio, enables entry into performance-oriented CPU water cooling. The difference to the Eisbaer CPU AiO is that the Ocean All-in One is not expandable. There are no plans to add additional components such as GPU coolers, radiators or expansion tanks. But not necessary! The selection of components and the structure of the Core Ocean enable a long service life with low maintenance requirements for water cooling of all common mainstream sockets from AMD and Intel.

Aluminum Radiator
Compared to Alphacool's all-copper models, the T38 aluminum radiator has additional cooling channels. This technical design allows a significant increase in cooling performance without restrictively influencing the water flow within the radiator. Due to the low height of 38mm, the radiator with one-sided fan fitting fits into the tightest housing and enables powerful water cooling of the CPU.

Core fan
The fan can be controlled from 0 to 2500 rpm via the 4-pin PWM connection. The cable is 40cm long. This means you can connect the fan to the mainboard or a special controller without additional adapter cables or extensions. At 2500 rpm it allows an air flow of 62.8 CFM, coupled with a high static pressure of 2.13mm/H2O. This makes the fan perfect for mounting on water cooling radiators.

Cooler & Pump
As with all Alphacool products, the cooler base is made of copper and is equipped with very fine cooling fins that are distributed over the entire base. A nozzle plate ensures accelerated flow over the cooling fins, which increases cooling performance. The water flow is optimized so that all areas of the radiator base are cooled evenly. The cooler is compatible with all common mainstream sockets from AMD and Intel. The built-in pump has a speed range of 2500 - 3500 RPM (+/- 10%) and can be controlled via PWM. The pump is connected to the mainboard or an external controller via the existing 4-pin fan connection. This allows the speed range of the pump to be controlled and read out.

Hoses & connections
The FEP hoses are 40cm long, sleeved and very flexible. The rotatable 360° connections to the cooler and radiator are permanently installed and cannot be replaced. The combination of hose and connection allows the AiO to be positioned very variably, even in the tightest PC housing.

lighting
There are 12 digitally addressable 5V RGB LEDs installed in the pump housing, which create unique, very elegant lighting. The digital aRGB LED lighting is connected via a JST 3-pin connector. To control the lighting, the 3-pin female connector must be connected to a digital RGB controller (not included) or a digital RGB capable mainboard. Additional digital RGB LEDs can be connected to the remaining 3-pin male connector.

Thermal paste
The thermal paste included in delivery has a thermal conductivity of 7.5 W/mK. The thermal grease does not harden, is well suited for high contact pressures and can be processed perfectly due to the optimally selected viscosity.

Compatibility:
AMD: AM4 / AM5
Intel: LGA 1150 / LGA 1200 / LGA 1700 / LGA 2066

Technical data radiator
L x W x H: 153 x 120 x 38mm
Material cooling fins, cooling channels & antechambers: 3003 aluminum
Material outer housing & thread: 3003 aluminum
Fins per inch: 19
Fan size: 120mm
Fan locations: 1 one-sided / 2 two-sided

Technical data fan
L x W x H: 120x120x25mm
Bearing type: hydraulic bearing
Nominal voltage: DC 12V
Operating voltage: DC 7-14V
Starting voltage: 7V
Rated current: 0.23 (Max 0.4) A
Rated capacity: 2.76 (Max. 4.8) W
Rated speed: 0 - 2500rpm/min
Max. Air Flow: 62.8CFM
Max. static pressure: 2.13mm H2O
Noise level (nominal voltage, quiet room, distance 1m): 33.0 (Max. 34.3) dBA
Speed ??control: PWM
Connection & control: 4-pin PWM (cable 40cm)

Technical data cooler & pump
L x W x H: 70.2 x 70.2 x 46mm
Radiator base material: copper
Pump housing material: Plastic (ABS+PC)
Fin structure radiator base: 0.1x0.1mm
Material pump bearing & shaft: Ceramic
Starting voltage: > DC 6V
Rated capacity: 7.1W
Noise level: 35DBa
Speed: 2500~3500
Digital aRGB power connection: 3-Pin 5V (male & female, cable length 30cm)
Number of aRGB LEDs: 12
Pump power connection: 4-pin JST (cable length 30cm)