The wishlist name can't be left blank

Alphacool Aurora GPX SLI Connector Dual X3, Digital RGB, Plexi

Product Highlights
  • GPX SLI Connector for two Alphacool Eisblock Aurora GPU water blocks
  • Serial flow path and spans over three PCIe slots.
  • Material: Plexi
  • Connectors: 2x G1/4"
  • Digital RGB connector: 3-pin 5V
$41.99
Low Stock (Only 3 left)

The new Alphacool Plexiglas GPX SLI Connectors in the now finally have RGB LED lighting!

The Aurora GPX SLI Dual is used when two Alphacool Eisblock Aurora graphics card coolers are in a single loop and need to be connected to each other. Using the GPX SLI connector means you save time, effort and nerves. This is because the connector can be mounted easier and faster than if the short distance was to be bridged with tubes. For this purpose, only the connection terminal of the two graphics card coolers is replaced with the GPX SLI connector.

The Aurora GPX SLI Dual Connectors are available in two versions, X3 and X4. If the two graphics cards are used in the first and third PCIE slots, X3 is used. If the graphics cards are used in the first and fourth slots, X4 is required.

The integrated, addressable RGB LED illumination provides for luminosity. Together with the Plexi, the area around the graphics cards is uniquely rounded off.

Technical data:

Dimensions: 87 x 100 x 30 mm (W x D x H)
Material: Plexi
Maximum working temperature: 60°C
Connectors: 2x G1/4" (1x IN, 1x OUT)
Digital RGB connector: 3-pin 5V
Weight: 240g
Scope of delivery: 6x M4x35 screws, 4x O-ring, 1x Digital RGB Adapter 4-1-Pin 5V

Notice: The SLI connectors may only be used to connect the same types of graphics cards.

More Information
Titan Rig SKU03-20-AC-0235-01-ON
BrandAlphacool
Number of Water Blocks Supported2